Removing casting from pressure pot after soft cure?

[Epic]

I'm casting my first key cap in a pressure pot and the resin takes 24 hrs to soft cure and 72 hours to hard cure.

When is it safe for me to remove the casting from the pressure pot? Ideally I would like to remove it as soon as possible (after the soft cure) so that I can free up my pressure pot for other work while the casting just sits on a shelf somewhere to hard cure. Is it okay to remove the casting from the pressure pot after the soft cure or would this re-introduce bubbles?

[Fleafa]

This is very dependent on the resin itself. Once cured, it should be safe to remove and allow to fully harden outside of the pot, but only trying it will tell you if that is really the case!