ATTENTION: As of March 2017 the Resin Addict Forums are being wound down.
New members are no longer being accepted. Read more about it here.

Can't put back the parts into the mold

Questions and discussion of tools, materials and techniques.

Moderator: Wardens

Can't put back the parts into the mold

Postby keithktam » Fri Jan 13, 2017 5:04 am

Hi, trying to do the second part of the mold now and facing a problem, in order to put the mold release into the tiny corner of the molds due to the shape and form of the parts, and also I had to clean out the clay from those areas as well, I had to take the parts out from the mold, and now they don't fit 100% back in!!! what should i do?? should i have not taken the parts out in the first place?? Please give advice cause i don't want to throw away the mold.....
Many thanks in advance
Posts: 3
Joined: Sat Jan 07, 2017 12:39 am

Re: Can't put back the parts into the mold

Postby Fleafa » Sat Jan 21, 2017 4:47 am

If making a two-part mould, never remove the former before pouring the second half.
User avatar
Posts: 835
Joined: Thu Jul 07, 2011 2:56 am
Location: Fareham, Hampshire, UK

Return to Dr Polymer

Who is online

Users browsing this forum: No registered users and 3 guests