Hello,
I am looking in the near future to do some casting when my project is done.
I have found this resin and I am thinking of giving a go
"Sika G27LV Low Viscosity Polyurethane Casting Resin 2kg
G27 LV is a very low viscosity casting resin for small section parts.
This resin is very searching and will pick out very fine detail.
The viscosity is 35 mPas
Mixed pot life of 2 minutes.
Demould time approximatly 15 minutes according to thickness.
Cure time approximately 3 hours. "
Found here:
http://www.sylmasta.com/acatalog/copy_o ... esins.html
Does anyone now a lower Viscosity resin?
I am going to attempt casting without a preasure chamber if that fails i might invest in a presure pot.