ATTENTION: As of March 2017 the Resin Addict Forums are being wound down. New members are no longer being accepted. Read more about it here.
Resin Addict Forum
A place to talk about your addiction
Casting Beginner Questions
Moderator: Wardens
37 posts
• Page 3 of 3 • 1, 2, 3
Re: Casting Beginner Questions
by Fleafa » Mon Mar 12, 2012 4:08 am
I have two small veterinary syringes which I use for mixing small amounts.
-
Fleafa - Junkie
- Posts: 835
- Joined: Thu Jul 07, 2011 2:56 am
- Location: Fareham, Hampshire, UK
Re: Casting Beginner Questions
by Anvils Hammer » Mon Mar 12, 2012 5:24 am
I have two scales. They cost me £10 each.
One does up to 300gram in increments of 0.1 gram, this is for silicone and larger resin pours.
The other does up to 50gram in increments of 0.01 gram, which I use for silicone catalyst and resin pours less than 20grams..
On the shopping list is a set which will do up to a kilogram in 1g increments, for silicone pours of more than 300 gram..
Accurate scales are your friend
AH
One does up to 300gram in increments of 0.1 gram, this is for silicone and larger resin pours.
The other does up to 50gram in increments of 0.01 gram, which I use for silicone catalyst and resin pours less than 20grams..
On the shopping list is a set which will do up to a kilogram in 1g increments, for silicone pours of more than 300 gram..
Accurate scales are your friend
AH
- Anvils Hammer
- Habit
- Posts: 232
- Joined: Fri Oct 07, 2011 8:58 am
Re: Casting Beginner Questions
by Fleafa » Mon Mar 12, 2012 8:06 am
Yeah, I have scales accurate to .1g which I use for RTV and PE.
Never needed more accuracy and have no trouble with syringe for PU.
Never needed more accuracy and have no trouble with syringe for PU.
-
Fleafa - Junkie
- Posts: 835
- Joined: Thu Jul 07, 2011 2:56 am
- Location: Fareham, Hampshire, UK
Re: Casting Beginner Questions
by Zhatan » Mon Mar 12, 2012 9:54 am
- Zhatan
- Casual
- Posts: 14
- Joined: Sun Mar 04, 2012 8:47 pm
Re: Casting Beginner Questions
by blind pig » Mon Mar 12, 2012 10:09 am
- blind pig
- Junkie
- Posts: 581
- Joined: Fri Feb 19, 2010 2:41 am
- Location: Brisbane Australia
Re: Casting Beginner Questions
by Fleafa » Mon Mar 12, 2012 10:24 am
Yep, still on my first two. Part B gets a little crusty, but a wipe with kitchen towel sorts that out.
-
Fleafa - Junkie
- Posts: 835
- Joined: Thu Jul 07, 2011 2:56 am
- Location: Fareham, Hampshire, UK
-
mangozac - Resin Addict Collaborator
- Posts: 4271
- Joined: Fri Oct 16, 2009 3:40 pm
- Location: QLD, Australia
37 posts
• Page 3 of 3 • 1, 2, 3
Who is online
Users browsing this forum: No registered users and 9 guests