ATTENTION: As of March 2017 the Resin Addict Forums are being wound down.
New members are no longer being accepted. Read more about it here.

Designing ships [possible BFG scale]

Projects using digital modelling and 3D printing

Moderator: Wardens

Re: Designing ships [possible BFG scale]

Postby Malika » Sun Feb 19, 2017 10:02 pm

Two of my Destroyer designs for Vanguard Miniatures are as good as ready.

Do you guys have any final feedback before I'm shipping them off for printing?

Image
Image
Bits Blitz - the place to be for all your bits needs!
User avatar
Malika
Junkie
 
Posts: 782
Joined: Wed Aug 07, 2013 10:56 pm

Re: Designing ships [possible BFG scale]

Postby Islacrusez » Mon Feb 20, 2017 12:10 am

I like it; it's got good lines and good silhouettes. Think only thing that sticks out is the vertical narrowing in the middle. The same point is marked horizontally (visible in plan view) but doesn't narrow so drastically and thus doesn't weaken the silhouette. Any way to produce a similar effect in the side view? I know it's a 40k thing so it could be intentionally so, but it's a pet peeve of mine, so feedback it gets :P
Islacrusez
Habit
 
Posts: 316
Joined: Wed Aug 07, 2013 11:45 am

Re: Designing ships [possible BFG scale]

Postby Malika » Tue Feb 28, 2017 6:14 am

Final shot before shipping these off...
Image
Bits Blitz - the place to be for all your bits needs!
User avatar
Malika
Junkie
 
Posts: 782
Joined: Wed Aug 07, 2013 10:56 pm

Re: Designing ships [possible BFG scale]

Postby Malika » Thu Mar 16, 2017 4:33 am

The idea behind this ship is that its weaponry is hidden inside the hull/prow of the ship. It's only visible because the ship's hatches are opened. I guess the model could also be used as a Defence Monitor.

Image
Image
Image

A few things that still need to be done:
(1) Tweaking some of the details
(2) Making an enclosed prow variant (where you don't see any weapons protruding)
(3) Make two bits to enclose the top part of the hull, to make it seem as if the turrets are hiding down below in the hull.
Bits Blitz - the place to be for all your bits needs!
User avatar
Malika
Junkie
 
Posts: 782
Joined: Wed Aug 07, 2013 10:56 pm

Re: Designing ships [possible BFG scale]

Postby Malika » Thu May 11, 2017 9:02 pm

Teaser...

Image
These'll be available at Vanguard Miniatures from tomorrow...

Image
Not sure yet when the bombers will be out, but I was curious if anybody would like to see a 6mm version of this one?
Bits Blitz - the place to be for all your bits needs!
User avatar
Malika
Junkie
 
Posts: 782
Joined: Wed Aug 07, 2013 10:56 pm

Re: Designing ships [possible BFG scale]

Postby Malika » Sat May 13, 2017 1:39 am

New release!!! I'm kinda excited here, for years I've been working on designing ships and one of the reasons why I've joined up with Vanguard Miniatures was to have my ship designs put in production. Hopefully this will be the beginning of a whole bunch of ships being released!

Novan Elites Panthera Class Heavy Frigate x 2 - £7.00
Image
Image
Image
The Panthera class Heavy Frigate is the workhorse of the Novan Elite fleets. Heavily armed and armoured, its various weapon configurations allow it to fulfil many different void combat roles.
No matter its broadside configuration, the Panthera’s basic armament includes two heavy twin linked dorsal mounted turrets and two pairs of prow torpedo tubes. Its broadsides allow for different types of weapon systems which can be changed whilst in dock due to it’s modular design.
Most commonly used are weapons batteries, more than capable of tearing huge chunks out of enemy vessels many times its own size. Another popular configuration for the Panthera is to fit it with launch bays, allowing the heavy frigate to carry several squadrons of Javelin fighters and Pilum bombers. In order to protect other ships of the fleet from waves of ordnance and enemy fighters the Panthera is sometimes also configured with broadside turret platforms capable of projecting a withering volume of defensive fire.


Panthera class heavy frigate x 2 with three broadside options each. Images show three vessels to demonstrate the broadside options.

Model is 52mm long, bases not included.


http://vanguardminiatures.co.uk/shop/no ... igate-x-2/
Bits Blitz - the place to be for all your bits needs!
User avatar
Malika
Junkie
 
Posts: 782
Joined: Wed Aug 07, 2013 10:56 pm

Re: Designing ships [possible BFG scale]

Postby Malika » Wed May 17, 2017 6:59 am

I've started working on a Lance Frigate as a follow-up to the Heavy Frigate I've done for Vanguard Miniatures.

I'm wondering which version you guys prefer: 3 lances (sides and bottom), 3 lances (sides and prow), or 4 lances (sides, bottom, and prow)?

Image
Image
Bits Blitz - the place to be for all your bits needs!
User avatar
Malika
Junkie
 
Posts: 782
Joined: Wed Aug 07, 2013 10:56 pm

Re: Designing ships [possible BFG scale]

Postby Malika » Thu May 25, 2017 7:13 am

The station is almost ready...
Image
Image

And I'm continuing to work on the Defence Monitor: modular prows!

Unarmed prow:
Image

Torpedo prow:
Image

Lance prow:
Image
Bits Blitz - the place to be for all your bits needs!
User avatar
Malika
Junkie
 
Posts: 782
Joined: Wed Aug 07, 2013 10:56 pm

Re: Designing ships [possible BFG scale]

Postby Malika » Fri May 26, 2017 5:14 pm

Still working on the Escort Carrier, including the prows:
Image
Image
Image
Bits Blitz - the place to be for all your bits needs!
User avatar
Malika
Junkie
 
Posts: 782
Joined: Wed Aug 07, 2013 10:56 pm

Re: Designing ships [possible BFG scale]

Postby Malika » Fri May 26, 2017 7:23 pm

The Defence Monitor and prow / turrets sprue is ready. If there's any other feedback, please let me know before I ship it off for printing.

Image
Image
Image
Image
Bits Blitz - the place to be for all your bits needs!
User avatar
Malika
Junkie
 
Posts: 782
Joined: Wed Aug 07, 2013 10:56 pm

Previous

Return to Digital Modelling

Who is online

Users browsing this forum: No registered users and 1 guest

cron