Resin Addict Forum

So, I bought the pressure chamber that ResinAddict recommended (the 2.5g one from Finish Systems one) and I need to get an air compressor for it.

What specs would I need?
There was a great used $50 one I was looking at, but it got sold already. There was a really cheap $25 one [ ], but I don't know if it had the power that I need (I'll be using a resin with a 7 min pot life. Degassing it in my vac chamber, then putting it in the pressure pot)

The compressor power isn't all that important - it simply determines how quickly the compressor's tank will fill. I recommend at least 120PSI and a 20L (5 gallon) tank. This ensures that the pressure pot can be filled quickly by the tank (so long as your pipework has no significant restrictions on flow rate).