Page 8 of 8
Re: Pressure Casting Equipment
Posted:
Fri Mar 30, 2012 12:21 am
by blind pig
Re: Pressure Casting Equipment
Posted:
Fri Mar 30, 2012 9:54 am
by Eltnot
Re: Pressure Casting Equipment
Posted:
Fri Mar 30, 2012 10:15 am
by blind pig
Re: Pressure Casting Equipment
Posted:
Fri Oct 12, 2012 12:27 am
by Jynxia
Thank you for explaining everything so clearly! This has been a great help.
After a bad run with a Chinese factory I think I might give casting another go.
I've one question though; I'm reproducing doll parts which have channels drilled through so they can be strung with elastic. I'm planning on reproducing ones made of sculpey and I'm scared that even if I clog them up with plastercine the pressure pot will explode them or just force silicone into them. Sorry if it sounds silly. ^^;;; also sorry if this has already been explained.
Re: Pressure Casting Equipment
Posted:
Tue Oct 16, 2012 8:54 pm
by mangozac
Jynxia, sorry for the late response!
Filling the channels with plastecine should be fine. Worst case is a bit of silicone gets forced into the drilled channel. No big deal - it's not going to ruin anything. Simply pull the part out and trim off the unwanted silicone...
Re: Pressure Casting Equipment
Posted:
Fri Nov 09, 2012 10:29 pm
by Magnetic Duckling
Re: Pressure Casting Equipment
Posted:
Mon Dec 10, 2012 8:45 pm
by Magnetic Duckling
*sound of the wind blowing in the trees* xD
Re: Pressure Casting Equipment
Posted:
Mon Dec 10, 2012 9:50 pm
by mangozac
Send Jynxia a PM to hurry her up
Haven't heard from you in a while Duckling - hope all is well!
Re: Pressure Casting Equipment
Posted:
Mon Aug 12, 2013 8:47 pm
by Magnetic Duckling
I got a general question but, how much psi loss would you say is normal within 1 hour? I feel like I'm losing way too much pressure.
Re: Pressure Casting Equipment
Posted:
Mon Aug 12, 2013 8:58 pm
by mangozac
I think I lose around 10 PSI (starting at 55 PSI). How much are you losing?
Re: Pressure Casting Equipment
Posted:
Mon Aug 12, 2013 9:32 pm
by Magnetic Duckling
I would say it doesn't matter anymore since it started leaking like shit just now. Just like the old one.
Edit : since this post feel so alone I thought I could give you an update on the subject. I believe the issue with this pot from hell was simply my strength, because a friend made me a tool to help me tighten everything and it stopped leaking ever since so yeah, girls ><;
Cheers <3