Here are the resin casts (I did put together the dragon for the photo...) :
Pré "cooking" mold (I have arranged the miniatures around the disk and worked with silicone some bumps and holes around them) :
Post cooking mold (resin miniatures have been very much damaged while separating the two halves of the mold) :
Here are the rest of the minis that were Inside the mold (heat made them turn green) :
And now, the vulcanised mold (you can notice one of the metal Anchor flipped and was attached to the wrong side of the mold, it won't be a problem for the mold's life or efficiency) :
Today, I'll be finishing the mold, cutting vents in it in all kinds of ways.
I'll post some photos...